Make place cards

Design the place card

1. Open Place cards from the menu. One card shows the first name at the first table. It folds along the dashed line, and the top half is upside down so it reads the right way once folded.

   

2. Under Size, folded, set Across and Tall. The line under them says how big each card is flat, before folding.

3. Under The name, pick the Font (the fonts on this wedding's table cards and your favorites), the Size, how the name is Shown as, Capitals and Ink.

   

4. Table number puts the table under the name, on the back, or nowhere. Name on the back too prints the name on both sides.

Print them

1. Under Printing, pick the Sheet, how many Cards on each sheet, the Edge the printer cannot reach and the Space between cards. The line under them says how many cards on how many sheets.

   

2. Press Print at the top. In the print window, set the paper to match, turn margins off, and keep the size at 100%.

3. Each table prints on sheets of its own, named in the margin, so the cards come off the printer sorted. Faint dots at the edges of each sheet and at every card's corners line up the cutter.

A guest still in the name bank has no table and gets no card; the line under Printing says how many.